Belal Ansary

  • Home
  • Author: Belal Ansary
protection relay event record analysis

How to Read a Protection Relay Event Record After an Unexpected Trip

Protection relay event record analysis helps engineers investigate an unexpected electrical trip by reviewing recorded indications, timestamps, measured quantities, and associated equipment status. The objective is to reconstruct what the available evidence shows, determine how the relay responded, and identify which questions still require investigation. After a trip, preserving the…
Read More
ETAP load flow study Saudi Arabia

When Does a Plant Expansion Need an ETAP Load Flow Study?

A plant expansion may justify an ETAP load flow study Saudi Arabia when new electrical loads, additional transformers, modified feeders, or changes to the distribution arrangement could affect the existing network’s operating conditions. An industrial load flow study helps engineers evaluate bus voltages, power flows, and equipment loading under defined…
Read More
PLC SCADA maintenance contract

How to Scope an Annual PLC/SCADA Maintenance Contract: Assets, Response and Deliverables

A PLC SCADA maintenance contract should clearly define which automation assets are covered, which preventive maintenance activities are included, how breakdown support is handled, and what reports and technical records the customer will receive. Without a detailed scope, a plant may discover that important equipment, software backups, on-site interventions, spare…
Read More
industrial communication protocol selection

Industrial Protocol Selection for PLC and Drive Integration: Modbus TCP, PROFINET or EtherNet/IP?

Industrial communication protocol selection for PLC and variable frequency drive (VFD) integration should be based on device compatibility, required data exchange, network architecture, diagnostics, application performance, and long-term support. Modbus TCP, PROFINET, and EtherNet/IP use different communication models and engineering approaches, so choosing one based only on brand preference or…
Read More
industrial automation handover documentation

Industrial Automation Handover Documents: The As-Built Pack Every Plant Should Receive

Industrial automation handover documentation should give the receiving plant an accurate, controlled record of the automation system actually installed, tested, and commissioned. A useful handover package identifies approved as-built drawings, I/O lists, tag mappings, PLC/SCADA/DCS software baselines, network interfaces, alarm records, test evidence, change history, backups, and outstanding actions. Without…
Read More
PLC SCADA FAT checklist

PLC/SCADA FAT Checklist: What Industrial Buyers Should Verify Before Shipment

A PLC SCADA FAT checklist helps industrial buyers verify that a programmable logic controller (PLC), supervisory control and data acquisition (SCADA) system, or integrated control system meets the approved project requirements before shipment. The factory acceptance test (FAT) should cover the applicable hardware, input/output (I/O) behavior, control logic, interlocks, alarms,…
Read More

PLC Interlock and Permissive Testing: A Pre-Startup Verification Guide

PLC interlock testing verifies that programmable logic controller (PLC) interlocks and permissives behave according to approved functional requirements before equipment startup. An unverified permissive may prevent an intended operation, while an incorrectly implemented interlock may fail to enforce a required restriction. Engineers should therefore verify expected states, test inputs, output…
Read More
Industrial Automation Companies in Saudi Arabia

How to Evaluate Industrial Automation Companies in Saudi Arabia: Engineering Depth, Integration Capability, and Lifecycle Support

Industrial automation companies in Saudi Arabia should be evaluated by their ability to integrate control systems, monitoring platforms, field devices, and operational requirements into a reliable, maintainable solution. For industrial facilities, selecting a suitable automation provider requires more than checking hardware availability: engineering teams should assess system architecture, PLC and…
Read More
PLC Preventive Maintenance checklist

PLC Preventive Maintenance and SCADA Troubleshooting: A Practical Guide for Industrial Reliability

A PLC preventive maintenance checklist helps industrial maintenance teams inspect programmable logic controllers, power supplies, I/O modules, communications, panel conditions, diagnostic records, and program backups before developing faults disrupt operations. SCADA troubleshooting complements this process by identifying problems in supervisory monitoring, communication networks, alarms, HMI displays, and data acquisition. For…
Read More